Kamis, 22 Desember 2011

True Blue JB2 - v2.4 Update Released

NEWS UPDATE: December 22th, 2011 -- Telah keluar 'updater' PKG untuk 'True Blue' dongle untuk meningkatkan kompabilitas dengan game-game baru.





Recently, there been a slow down on the number of patched eBOOTs released by the 'warez' group Paradox and one of the main reasons was 'game compatibility' with some of the newer PS3 game titles that have yet to be released, as such they have again reach out to the 'True Blue' developers for answers, and together have fine-tuned the dongle 'firmware' patches some more, resulting in a new update v2.4 which has been released today, that will be needed for all future games that get released.

As such now that the 'stability' has been improved between the newer games and the 'True Blue' dongle, you will see over the Holiday week another dozen or so games being released!


============================
True Blue Dongle Update v2.4
============================

How to update:
--------------

1. Make sure your PS3 is running the True Blue "3.55-Dongle" CFW (custom firmware)
2. Copy TrueBlueUpdate-2.4.pkg from this archive to a USB flash drive
3. Boot your PS3 _WITHOUT_ True Blue inserted, and then insert the USB flash drive
4. Navigate to (Game) -> (Install Package Files), and then select TrueBlueUpdate-2.4.pkg
5. The True Blue updater will be installed onto your PS3 HDD
6. Navigate to (Game) and load "True Blue Update v2.4"
7. The updater will start, and will then prompt you to insert the True Blue dongle.

Insert it only at this point, and continue. Your dongle will then be updated
8. After the update procedure has completed your PS3 will reset, and you will then
be able to enjoy your updated dongle
9. You may delete the True Blue Updater from your HDD after the update is complete

Change log:
-----------

- v2.4

* Stability improvements
* Enhanced dongle security

- v2.3

* Fixed games requiring "BD Mirror"
* True Blue firmware version is now displayed on the XMB "System Information" screen

- v2.2

* Initial worldwide release
* Support for running "True Blue" titles directly from HDD via standard backup managers



True Blue Introduction


Unlock the true potential of your PS3 with True Blue – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.

Features include:

· Booting of games designed for PS3 system software v3.6 and above

· Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers

· Does not require the power/eject trick

· Custom v3.55 Dongle firmware behaves like OFW when True Blue is not inserted

· Manufactured from highest grade components and Actel based

· Durable and high quality metal case design

· Tough and durable plastic packaging

· Further features to be added as they are developed

· On board 2 MBytes SPI flash

· Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, True Blue cannot downgrade a console)

· Supports all regions of consoles

· Supports all regions of v3.6+ games

· Rock solid crystal oscillator on board for flawless timing

Using True Blue

To use True Blue, simply insert the dongle into one of the USB ports on your PS3 and power the system up. Do not remove the dongle at any point while the PS3 is running.

True Blue for the most part functions just like a regular jailbreak/CFW in that you may install and run any homebrew software and all of the standard backup managers are supported. The most notable difference is that games designed for PS3 system software v3.6 and above are also supported.

However, in order to enjoy such titles, you must first obtain special “True Blue compatible patches” which have been specially modified to function with True Blue. Such modified versions are available for download through the “usual channels” and are clearly labelled as being True Blue compatible.

Once you have obtained True Blue modified patches, simply rip your original game disc to your PS3 internal or external USB HDD as you would with any usual jailbreak game and then overwrite the files from the "patch" package and then launch in the usual manner through any one of the many available backup managers.



Kamis, 01 Desember 2011

Team REBUG releases v4.00 Spoofer and new 'Updater Packages' for their CFW

Dalam waktu yang berdekatan Codename: REBUG team setelah selesai meliris v3.73 spoofer, (yang mana mereka tunda untuk mengeluarkannya karena mereka ingin meaktifkan kompabilitas reActPSN v2.0 secara penuh).

Sony mengumumkan bahwa ada update firmware v4 untuk PS3 dan sekarang telah diluncurkan di seluruh dunia. Dan team REBUG dengan cepat mengeluarkan update spoofer mereka untuk handle firmware v4.00 yang baru release. Selain itu team REBUG release Updater Packagers untuk REBUG CFW mereka dan tentu saja masih memungkinkan kompatibilitas penuh terhadap reActPSN 2.0 untuk penguna firmware v3.55 bersama dengan v4.00 spoofing.


Download:

Rebug_Update_Package.pkg (True Blue dongle needed)

4.00_Version_Spoofer_2.1_355.pkg

***** THIS DOESNT ALLOW PSN *** USE AT YOUR OWN RISK *****


Install
Rebug Update Package 0.4 (3.41.3) or Rebug Update Package 0.6 (3.55.2 & TB Edition) to update REBUG’s version spoof files to 4.00 and enable reActPSN 2.0 compatibility. As usual all previous fixes and updates are included.


UPDATER WILL PERFORM THE FOLLOWING TASKS

Update the Rebug Selector package to Rebug Selector 1.5.1 and 1.6.1
(Finally got around to fixing the display resolution on HD tv’s)

Update the current version spoof files to 4.00

Add reActPSN 2.0 compatibility

(Credit to Hotz8611)

And here is another brief run-down on the new Spoofer package:


***** THIS DOESNT ALLOW PSN *** USE AT YOUR OWN RISK *****

*********** THIS WILL NOT WORK ON REBUG FIRMWARE ***********


Thought we would get it done quick this time around,
4.00 Version Spoofer 2.1 is now available for 3.41 and 3.55. We have added a little extra flavour in the form of reActPSN 2.0 compatibility for both your normal and spoofed vsh.self. The app backs up your current files before activating the spoof, then auto reboots.

INSTALL:
Press
L1+CROSS to INSTALL 4.00 Version Spoof files to your PS3

ACTIVATE/DEACTIVATE:
Press
L1+CROSS to ACTIVATE/DEACTIVATE (System will reboot)

UNINSTALL:
Press
L1+CIRCLE to UNINSTALL (this will deactivate the spoofer, remove the spoof files from dev_flash and reboot if needed)


NOTE:
Your PS3 will need to be restarted to use reActPSN 2.0 if you HAVE INSTALLED but NOT ACTIVATED the Version Spoofer.

Enjoy




Rebug PS3 Custom Firmware 3.55.2 CFW TB (True Blue) Edition Out

Download: Rebug 3.55.2 CFW TB Edition (True Blue dongle needed)

*** WARNING – DO NOT INSTALL THIS UPDATE IF YOU DO NOT OWN A TRUE BLUE DONGLE ***

After thinking it over the team came to the conclusion that in the not to distant future, there will be a whole lot of unhappy REBUG users who want to enjoy their new True Blue Dongle only to realise that their hard earned save games which ran using the Fake Save Data Owner option will no longer work.

As a courtesy for our loyal users we have put together REBUG 3.55.2 TB EDITION.

The Codename: Rebug Team take NO CREDIT for the COREOS work as we are using the True Blue CFW COREOS with the REBUG dev_flash files (straight swap, everything works so far!!).

FEATURES INCLUDED/ADDED/UPDATED

INCLUDED - All REBUG 3.55.2 Features

INCLUDED - True Blue CFW COREOS

(Requires True Blue Dongle to run True Blue patched 3.60+ Games)

ADDED - reActPSN 2.0 compatibility

(Credit to Hotz8611)

ADDED - No act.dat deletion on reboot

(This is our own. We feel it is a little bit cleaner than the original reActPSN 2.0 patch)

UPDATED - 3.73 Version Spoof files

UPDATED - Rebug Selector 1.5.1 & 1.6.1

(Finally got around to fixing the display resolution on HD tv’s)

INSTALL:
REBUG 3.55.2 TB EDITION can be installed over the same or lower version OFW/CFW/MFW on any model PS3 through the XMB or Recovery Mode.

UNINSTALL:
REBUG 3.55.2 TB EDITION
can be uninstalled with the same version OFW/CFW/MFW on any model PS3 through the XMB or Recovery Mode.

PLAYING BACKUPS:
Just like the Official True Blue CFW, after installing REBUG 3.55.2 TB EDITION the True Blue Dongle MUST be connected to the PS3 for ANY of your backups to run.

NOTE: Rebug Selector 1.5.1 and 1.6.1 are identical in their function but for some reason on random PS3 Rebug Selector 1.5.1 (Which we consider to be the more user-friendly) freezes. We have included them both just incase.

Enjoy

~Codename: REBUG Team




PS3 System Software Update (v.4.00)


Sebuah langkah yang mengejutkan dari pihak Sony, mengumumkan kepada semua orang bahwa mereka telah merilis firmware v4.0 dalam minggu ini untuk PS3. Dengan mengupdate firmware v4.0 di system PS3 mereka, pemilik PS3 dapat memungkinkan akses yang tepat untuk kedatangan PS-Vita yang akan di launcing di Jepang.

A new system software update (v4.00) will be released this week. In preparation for the launch of PS Vita in Japan, this update will prepare the PS3 to serve as a content management device. It will allow users to copy their media content such as games, music, photos, and videos between PS Vita and PS3, back up PS Vita save data to your PS3 hard drive, and update the system software for your PS Vita system using the network features of your PS3.


Other changes to take effect with this update include:


PlayStation Plus members can now choose to enable or disable each automatic update feature

· Game patches

· System software

· Recommended games and videos

· Sync trophy information

New PSN privacy settings for filtering friend requests and messages

Of course after all this 'True Blue' releases and 'KaKaRaTo' tweets about a v3.73 Jailbreak, everyone already got their gears in their heads spinning out of control, wondering what other 'hidden' features or changes have been made, and even more amazing is 'legit' developers don't even have the v4.0 so far they are still playing around with v3.74 on their systems which didn't have any 'major' changes.

Senin, 28 November 2011

Team REBUG releases v3.73 Spoofer and new 'Updater Packages' for their CFW

Bagi anda yang menggunakan jailbreak untuk memainkan game ps3 copy anda dapat menggunakan REBUG v3.73 Spoofer ini untuk update syetem anda yang 3.55 menjadi 3.73
Dengan mengunakan REBUG v3.73 Spoofer anda dapat menjalankan PS3 membaca game copy meski system anda menjadi 3.73.

It been a little delayed, as the Codename: REBUG team been very busy on many projects, but finally they have released a v3.73 Spoofer and new Updater Packagers for their REBUG CFW that enabled full reActPSN 2.0 compatibility for both older v3.41 users and current v3.55 users.

Download:


***** THIS DOESNT ALLOW PSN *** USE AT YOUR OWN RISK *****


Install
Rebug Update Package 0.3 (3.41.3) or Rebug Update Package 0.5 (3.55.2) to update REBUG’s version spoof files to 3.73 and enable reActPSN 2.0 compatibility. As usual all previous fixes and updates are included.


UPDATER WILL PERFORM THE FOLLOWING TASKS

Update the Rebug Selector package to Rebug Selector 1.5.1 and 1.6.1
(Finally got around to fixing the display resolution on HD tv’s)

Update the current version spoof files to 3.73

Add reActPSN 2.0 compatibility
(Credit to Hotz8611)

INSTALL
1:
Install Rebug_Update_Package.pkg file from XMB
2:
Run Rebug Update Package from the [Games] menu
3:
Follow the on screen prompts
4:
PS3 will reboot if needed when finished

NOTE:
Once the PS3 has rebooted you can delete Rebug Update Package from your XMB as it is not needed.

NOTE:
Rebug Selector 1.5.1 and 1.6.1 are identical in their function but for some reason on random PS3 Rebug Selector 1.5.1 (Which we consider to be the more user-friendly) freezes. We have included them both just incase.



***** THIS DOESNT ALLOW PSN *** USE AT YOUR OWN RISK *****
*********** THIS WILL NOT WORK ON REBUG FIRMWARE ***********


Sorry on the delay,
3.73 Version Spoofer 2.1 is now available for 3.41 and 3.55. This time around we have added a little extra flavour in the form of reActPSN 2.0 compatibility for both your normal and spoofed vsh.self. The app backs up your current files before activating the spoof, then auto reboots leaving no room for end-user error.

INSTALL:
Press
L1+CROSS to INSTALL 3.73 Version Spoof files to your PS3

ACTIVATE/DEACTIVATE:
Press
L1+CROSS to ACTIVATE/DEACTIVATE (System will reboot)

UNINSTALL:
Press
L1+CIRCLE to UNINSTALL (this will deactivate the spoofer, remove the spoof files from dev_flash and reboot if needed)

NOTE:
Your PS3 will need to be restarted to use reActPSN 2.0 if you HAVE INSTALLED but NOT ACTIVATED the Version Spoofer.

Enjoy

~
Codename: REBUG

Jumat, 25 November 2011

True Blue JB2 - v2.3 Update Released - More Games Now Playable

Less then week since the v2.2 update, the 'True Blue' team have improved their firmware to make more games now playable!


The 'True Blue' team again comes thru with more support, this time with another update (v2.3), which was developed after the team was contacted by 'Paradox' in regard to problems with some of the latest games like 'Modern Warfare 3', and up-coming releases and patches, after some brain-storming and figuring out the compatibility problems the 'True Blue' team has now released the v2.3 update which will be required for all 'future' PS3 games released, here is the current change log:

- v2.3

* Fixed games requiring "BD Mirror"
* True Blue firmware version is now displayed on the XMB "System Information" screen

- v2.2

* Initial worldwide release
* Support for running "True Blue" titles directly from HDD via standard backup managers

PLEASE NOTE: You need to update your 'True Blue' dongle to the latest firmware if you wish to enjoy all the new up-coming releases with full compatibility and no problems.

For more information and firmware updates please check out our 'True Blue' v2.3 F.A.Q.

Here is a recent video showing the HDD v2.2 feature of the 'True Blue', with a PS3 playing the 'Portal 2' game just recently released by Paradox 'scene' group :





True Blue Introduction

Unlock the true potential of your PS3 with True Blue – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.

Features include:
Booting of games designed for PS3 system software v3.6 and above
Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers
Does not require the power/eject trick
Custom v3.55 Dongle firmware behaves like OFW when True Blue is not inserted
Manufactured from highest grade components and Actel based
Durable and high quality metal case design
Tough and durable plastic packaging
Further features to be added as they are developed
On board 2 MBytes SPI flash
Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, True Blue cannot downgrade a console)
Supports all regions of consoles
Supports all regions of v3.6+ games
Rock solid crystal oscillator on board for flawless timing
Using True Blue

To use True Blue, simply insert the dongle into one of the USB ports on your PS3 and power the system up. Do not remove the dongle at any point while the PS3 is running.

True Blue for the most part functions just like a regular jailbreak/CFW in that you may install and run any homebrew software and all of the standard backup managers are supported. The most notable difference is that games designed for PS3 system software v3.6 and above are also supported.

However, in order to enjoy such titles, you must first obtain special “True Blue compatible patches” which have been specially modified to function with True Blue. Such modified versions are available for download through the “usual channels” and are clearly labelled as being True Blue compatible.

Once you have obtained True Blue modified patches, simply rip your original game disc to your PS3 internal or external USB HDD as you would with any usual jailbreak game and then overwrite the files from the "patch" package and then launch in the usual manner through any one of the many available backup managers.